Brochure

ManualsBrandsSonifex ManualsActive Nearfield MonitorsReference monitor

Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk

REFERENCE MONITORS

REFERENCE MONITORS - RM-2S4 & RM-2S10

Reference Monitors

RM-2S4 Reference Monitor, 2 LED Meters & 4 Stereo Channel Inputs

RM-2S10 Reference Monitor, 2 LED Meters & 10 Stereo Channel Inputs

RM-2S4 Front Panel

RM-2S4 Rear Panel

RM-2S4 Front & Rear Views

The RM-2S4 and RM-2S10 are 1U rack-

mount units oering quality loudspeaker

monitoring and accurate, high-resolution

metering of up to four (RM-2S4) or

twenty (RM-2S10 both analogue and

digital) stereo audio sources and more

with the addition of optional expansion

cards. Sources may be in any mixture of

analogue and AES/EBU digital formats, with

sample rates up to 192kHz accepted.

Audio inputs on the RM-2S4 can be

analogue or digital because they are

autoswitching using the left Neutrik™ XLR

for AES/EBU, or both Neutrik™ XLRs for

analogue inputs and they can be used in any

combination. The RM-2S10 has 10 separate

analogue and digital inputs.

Analogue inputs can be balanced or

unbalanced in any combination. The digital

inputs have switchable AES/EBU termination

for (close-range) bridging operation and

there is extra global input gain available for

both analogue and digital low-level sources.

Sources (and additional banks of sources, if

tted) are selected via a front panel

Two separate audio

monitors for monitoring

stereo channels:

5 Band Parametric Equalisation

Each product in the Reference

Monitor range contains an embedded

5 band parametric equaliser.

On testing the units, they are set up to

give a at response across the quoted

frequency range, but the parametric

EQ allows you to alter the response

either to account for poor acoustics in

the room that the monitor is mounted

in, or to suit your particular listening

tastes.

Using the free of charge SCi remote

control software, preset EQ settings

can be selected, or dierent EQ

settings can be created and stored.

RM-2S4 with 4 analogue

or digital stereo channels

RM-2S10 with 10

analogue and 10 digital

stereo channels