Manual
Table Of Contents
- Analogue Redbox User Handbook rev 1.92
- Contents
- Figures
- Warranty, Safety & Installation Information
- RB-MA1 Single & RB-MA2 Dual Microphone Amplifiers
- RB-SM1 Single & RB-SM2 Dual Stereo To Mono Converter
- RB-UL1 Single, RB-UL2 Dual & RB-UL4 Quad Stereo Unbalanced
- RB-LU4 Quad Stereo Balanced To Unbalanced Converter
- RB-BL2 Single & RB-BL4 Dual Bi-Directional Matching Converte
- RB-SL2 Twin Mono, or Stereo, Limiter
- RB-DA6 6 Way Stereo Distribution Amplifier
- RB-HD1 Stereo Headphone Amplifier
- RB-HD6 6 Way Stereo Headphone Distribution Amplifier
- RB-SD1 Silence Detection Unit
- RB-PMX4 10 Input, 4 Output Analogue Preset Mixer
- RB-LI2 Stereo Line Isolation Unit
- RB-PLI6 6 Way Mono Passive Line Isolation Unit
- RB-SS10 10 Way Stereo Analogue Source Selector/Mixer
- RB-LC3 3 Way Light/Power Controller
- Glossary
- Connectors And Cabling
- Index
Chapter 17 - Connectors and Cabling
Redbox User Handbook 17-1
17. Connectors And Cabling
Many of the problems associated with installing and maintaining studio equipment are
due to the use of poor cables or faulty connections. It is recommended that, wherever
possible, pre-wired cables are purchased from recommended manufacturers. If you
need bespoke cables making, please ensure that a qualified engineer carries out the
work.
The main types of connectors used with the Redboxes are the following:
17.1. XLR 3 Pin Connectors
The following diagram shows the pin details for the 3 pin XLR sockets and plugs:
Fig 17-1 : XLR Connectors
17.2. RCA Phono Connectors
The following diagram shows the connection details for the RCA phono connectors:
Fig 17-2 : RCA Phono Connector
Signal
Ground
Input
3 Pin Socket
( Female )
3 Pin Plug
( Male )
Output
Pin 2. Hot ( In Phase ) Signal Pin 2. Hot ( In Phase ) Signal
Pin 3. Cold ( Out Of Phase ) Signal Pin 3. Cold ( Out Of Phase ) Signal
Pin 1. Ground ( Screen ) Signal Pin 1. Ground ( Screen ) Signal