Manual

Redbox User Handbook No 2
51
If de-emphasis is ‘on’ (switch 1) the RB-DHD6 will decode 50/15µs emphasis when indicated
by certain channel status bits in the incoming digital audio data. When ‘o’, no de-emphasis
is applied. The switch is ‘on’ when it is down.
Digital Input Select Button
This button is used to switch the digital input between the AES/EBU XLR connector (button
out) and the S/PDIF phono connector (button in).
Technical Specications
Audio Specication
Input Impedance: 110Ω ± 20% AES/EBU
75Ω ±5% S/PDIF
Sample Freq. Range: 30kHz – 100kHz
Dynamic Range: >100dB
Headphones: Drives 150 mW into 32Ω to 600Ω headphones
Max Output Level: +12dBu
Headphone Gain Range: -80dBu to +12dBu
Connections
Digital Inputs: 1 x AES/EBU XLR 3 pin female
1 x S/PDIF RCA phono
Headphone Outputs: 6 x ¼” (6.35mm) A/B gauge 3-pole stereo jack sockets
Mains Input: Filtered IEC, 110-120V, or 220-240V switchable,
fused 10W max
Fuse Rating: Anti-surge fuse 100mA 20 x 5mm (230VAC)
Anti-surge fuse 250mA 20 x 5mm (115VAC)
Operational Controls
Digital Input Select: AES/EBU or S/PDIF, via push-switch
De-emphasis: DIP switch
Equipment Type
RB-DHD6 Digital 6 way stereo headphone distribution amplier
Physical Specications
Dimensions (Raw) 48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
Dimensions (Boxed) 53cm (W) x 20.5cm (D) x 6cm (H)
Weight Nett: 1.6kg Gross: 2.2kg
AUDIO DISTRIBUTION AMPLIFIERS - RB-DHD6
HEADPHONE DISTRIBUTION
AMPLIFIERS
13