Manual

50
Redbox User Handbook No 2
Fig 13-4: RB-DHD6 Rear Panel.
AES/EBU Input
The digital input XLR 3 pin socket has an impedance of 110Ω. It has the following
connections:
Pin 1: Screen
Pin 2: Phase
Pin 3: Non-phase
The signals on this connector should meet the IEC 60968 specication
S/PDIF Input
The S/PDIF digital phono input has an impedance of 75Ω.
Status Select Switches
Status
1 On De-emphasis On
1 O De-emphasis O
2 Reserved
3 Reserved
4 Reserved
Fig 13-5: RB-DHD6 Status Select Switches.
Sync & Power Indicator
The LED on the front panel is normally red to indicate that power is present on the unit.
However, it also has a secondary role to indicate the status of the digital inputs
Flashing between red and amber – indicates a loss of a valid digital input signal.
Headphone Outputs
The headphone outputs on the front panel consist of six ¼” stereo jack sockets, designed to
drive 150 mW into 32Ω to 600Ω professional headphones.
Volume Control
The headphone outputs each have their own volume control and have a maximum output
level of +12dBu.
Rear Panel Connections and Operation
AES/EBU
Input
S/PDIF
Input
Digital
Input
Select
Status
Select
Switches
AUDIO DISTRIBUTION AMPLIFIERS - RB-DHD6
AUDIO DISTRIBUTION
AMPLIFIERS
13