Handbook

Table Of Contents
18
Redbox User Handbook No 3
MIXER & SOURCE SELECTORS
MIXER & SOURCE SELECTORS - RB-SS10
Status Outputs
This 25 way D-type socket (female) connector contains the remote status tallies.
Pin No. Signal Name I/O Description
Pin 1 REMTALLY1 O Internal open collector to ground for output 1
Pin 2 REMTALLY2 O Internal open collector to ground for output 2
Pin 3 REMTALLY3 O Internal open collector to ground for output 3
Pin 4 REMTALLY4 O Internal open collector to ground for output 4
Pin 5 REMTALLY5 O Internal open collector to ground for output 5
Pin 6 REMTALLY6 O Internal open collector to ground for output 6
Pin 7 REMTALLY7 O Internal open collector to ground for output 7
Pin 8 REMTALLY8 O Internal open collector to ground for output 8
Pin 9 REMTALLY9 O Internal open collector to ground for output 9
Pin 10 REMTALLY10 O Internal open collector to ground for output 10
Pin 11 N/C - No internal connection
Pin 12 N/C - No internal connection
Pin 13 GND - Signal ground
Pins 14 to 23 +5V O To supply up to a maximum of 100mA
Pin 24 N/C - No internal connection
Pin 25 N/C - No internal connection
Fig 2-10: Status Output Pin Connections.
Pins 1 to 10 are to replicate the front panel push button indicators. An example of how to
connect the signals is shown below.
Pins 11, 12, 24 and 25 have no connection inside the unit.
Fig 2-11: Connection Example.
Start Output
Collector 1 to 10
(Pins 1 to 10)
Start Output
Emitter 1 to 10
(Pins 14 to 23)
Play
Command
Command
Common
Remote Inputs 1 to 10
Front Panel Inhibit Mix Mode
(Pins 1 to 12)
Signal Ground
(Pins 14 to 24)
+5V
(Pins 14 to 23)
Remote Tally 1 to 10
(Pins 1 to 10)
2