Manual

Chapter 10 - RB-DSS10 10 Way Stereo Digital Source Selector
10-8 Redbox User Handbook
10.4.3.4. Status Outputs
This 25 way D-type socket (female) connector contains the remote status tallies.
Pin No. Signal Name I/O Description
Pin 1 REMTALLY1 O Internal open collector to ground for output 1
Pin 2 REMTALLY2 O Internal open collector to ground for output 2
Pin 3 REMTALLY3 O Internal open collector to ground for output 3
Pin 4 REMTALLY4 O Internal open collector to ground for output 4
Pin 5 REMTALLY5 O Internal open collector to ground for output 5
Pin 6 REMTALLY6 O Internal open collector to ground for output 6
Pin 7 REMTALLY7 O Internal open collector to ground for output 7
Pin 8 REMTALLY8 O Internal open collector to ground for output 8
Pin 9 REMTALLY9 O Internal open collector to ground for output 9
Pin 10 REMTALLY10 O Internal open collector to ground for output 10
Pin 11 N/C - No internal connection
Pin 12 N/C - No internal connection
Pin 13 GND - Signal ground
Pins
14 to
23
+5V O To supply up to a maximum of 100mA
Pin 24 N/C - No internal connection
Pin 25 N/C - No internal connection
Fig 10-10: Status Output Pin Connections
Pins 1 to 10 are to replicate the front panel push button indicators. An example of
how to connect the signals is shown below.
Pins 11, 12, 24 and 25 have no connection inside the unit.
Fig 10-11: Connection Example
R
Remote Tally 1 to 10
(Pins 1 to 10)
+5V
(Pins 14 to 23)