Manual

Chapter 10 - RB-DSS10 10 Way Stereo Digital Source Selector
Redbox User Handbook 10-3
10.3. Front Panel Indicators & Controls
Fig 10-3: RB-DSS10 Front Panel
10.3.1. Power Indicator
The LED on the front panel is used to indicate that power is present on the unit.
However, it also has a secondary role to indicate whether the selected channel is
routing the AES/EBU or S/PDIF input:
Red indicates AES/EBU input.
Amber indicates S/PDIF input.
The LED and remote tally flash, if the incoming audio signal is not present, to indicate
that the incoming digital signal is missing.
10.3.2. Illuminated Push Buttons
The front panel contains 10 illuminated push buttons, used for selecting a digital
source. The push button illuminates when the input is selected and flashes when the
selected input loses lock.
There is also a remote input to inhibit the front panel switches. When the front panel
inhibit is active, pressing the front panel switches has no effect on the current channel
selection.
10.3.3. Headphone Output
The output available on the front panel through a ¼” stereo jack socket, is designed
to drive 150 mW into 32Ω to 600Ω professional headphones.
10.3.4. Volume Control
The headphone output has its own volume control and has a maximum output level of
+12dBu.
RB-DSS10
DIGITAL SOURCE SEL ECT
LEVEL
HEADPHONES
1 10798
6
5
432
10.3.210.3.1
10.3.3
10.3.4