Manual

Chapter 6 - RB-SC1 Sample Rate Converter
Redbox User Handbook 6-5
If the sync signal is removed then the output sample rate will be set by, and locked
to, the internal on-board clock generator at the closest frequency available to the
previous sync input.
In Slave sync mode, switch position D, the digital output sample rate follows the sync
input. When the sync signal is not present the digital output is turned off.
Fig 3-5, also printed on the top of the
unit, summarises the rotary switch
settings and shows the sample rate
generated by the internal clock
generator in master and auto sync
modes.
Fig 6-5: RB-SC1 Frequency and Sync Rotary Switch
kHz
32 44.1 48 64 88.2 96
MASTER012345
AUTO 6789AB
AUTO LOCK = C
FREQUENCIES AND SYNC MODES
SLAVEMODE=D