Manual

Chapter 6 - RB-SC1 Sample Rate Converter
Redbox User Handbook 6-3
6.4. Rear Panel Connections and Operation
Fig 6-3: RB-SC1 Rear Panel
6.4.1. Inputs and Outputs
6.4.1.1. AES/EBU Inputs
The digital source and digital sync XLR 3 pin sockets both have an impedance of 110
ohms. They have the following connections:
Pin 1: Screen
Pin 2: Phase
Pin 3: Non-phase
The signals on these connectors should meet the IEC 60968 specification
6.4.1.2. S/PDIF Inputs
The digital source and digital sync S/PDIF phono inputs both have an impedance of 75
ohms.
6.4.1.3. Word Clock Input
The BNC TTL word clock input has an impedance of 50 ohms.
6.4.1.4. AES/EBU Output
The digital output XLR 3 pin socket has an impedance of 110 ohms. It has the
following connections:
Pin 1: Screen
Pin 2: Phase
Pin 3: Non-phase
The signals on this connector will comply with the IEC 60968 specification
Disconnect the mains supply before removing the equipment covers.
S/PDIF
S/PDIF INPUT
OUTPUT SELECT
WORD
CLOCK
AES/ EBU
OUTPUT
SYNC INPUTS
AES/ EBU
INPUT
AES/ EBU
INPUT
This product must be earthed
FREQUENCIES
AND SYNC MODES
AES/EBU
S/PDIF
AES/EBU
S/PDIF
STATUS
6.4.2.3
6.4.1.2
6.4.1.3
6.4.1.5
6.4.1.1
6.4.2.1
6.4.1.4
6.4.2.2