Manual

Warranty, Safety & Installation Information
Redbox User Handbook v
Fitting Redboxes
Redboxes can be fixed to the underside of a mixing desk, or other surfaces using 2 off
No. 6 countersink screws.
They can also be rack-mounted, with either the front, or rear of the Redbox
positioned at the front of the rack:
Front Mounting Redboxes: For rack mounting smaller (28cm) units the optional
RB-RK1 (Red) or RB-RK1B (Black) kit can be used (which include 4 off M6 panel
fixing screws).
Fig W-2: RB-RK1 (B) Small Redbox Front Rack-mount Kit
Rear Mounting Redboxes: For rear panel mounting you can use either the RB-RK2,
or RB-RK3, depending on the size of your Redbox.
RB-RK2 1U rear panel rack kit for small Redbox range, e.g., RB-DDA6A
Fig W-3: RB-RK2 Small Redbox Rear Rack-mount Kit
E.g. for fitting an RB-BL2:
RB-RK3 1U rear panel rack kit for large Redbox range, e.g., RB-ADDA
Fig W-4: RB-RK3 Large Redbox Rear Rack-mount Kit
E.g. for fitting an RB-DA6: