Handbook

64
Redbox User Handbook No 1
SYNCHRONISERS, DELAYS &
SILENCE DETECTORS
SYNCHRONISERS, DELAYS & SILENCE DETECTORS - RB-DS2
7
Technical Specications RB-DS2
Audio Specication
Maximum Input Level: +27dBu
Input Impedance: > 10kΩ bridging
Input Levels: +24dBu / +18dBu / +12dBu for FSD
Gain Range: Adjustable 3dB loss to 3dB gain (L & R adjust)
Signal to Noise: Better than –101dBFS (RMS A-weighted at 24bit)
Dynamic Range: > 110dB
Distortion & Noise: > 96dB THD + N at 1kHz
Maximum Output Level: +24dBu
Output Impedance: < 50Ω
Dynamic Range: > 100dB
Gain Range: –6dBu to +24dBu output level, ref FSD
Sampling Frequency: 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz or 96kHz
Sample Width: 16bit or 24bit
Channels: Stereo, Dual Mono or Mono
Format (Fields & Frames): 25, 24 or 30 frames per second or 30 drop frame
Delay Units: Samples, Fields, Frames or Time (msecs or hh:mm:ss
in ext. mode) & Metres (normal mode only)
Minimum Delays 30 samples at 32kHz, 44.1kHz and 48kHz
20 samples at 64kHz, 88.2kHz, 96kHz
Maximum Delays: See Figures 7-7, 7-8 and 7-9.
Analogue/Digital Connections
Analogue Inputs: 2 x XLR 3 pin female (balanced) (L & R)
Analogue Outputs: 2 x XLR 3 pin male (balanced) (L & R)
Digital Inputs: 1 x AES/EBU XLR 3 pin female
Digital Outputs: 1 x AES/EBU XLR 3 pin male