Handbook
Redbox User Handbook No 1
129
Miscellaneous Page
Fig 10-12: Miscellaneous Page
This page is used for the connecting and disconnecting SCi to the unit and for updating the
rmware. The Special Modes are also selected form here.
Updating The Firmware
The RB-DSD1 rmware will at times be updated to add new features, or to correct any
possible issues that may arise. Check for updates at:
http://www.sonifex.co.uk/technical/software/
To update the rmware click on the button labeled “Update Firmware” and then select the
downloaded rmware le. Firmware les for the RB-DSD1 always have an “.ldr” extension.
A progress bar will appear in SCi, indicating how much of the le has been uploaded
to the unit.
When the unit switches to update mode, the front panel display leds will all be extinguished.
The left program LED is then used to display the status of the upload:
Uploading the Code: The LED will begin to ash amber to conrm the unit is receiving the
new rmware to RAM.
Copying Code To Flash Memory: The LED will be solid amber while the unit checks the
integrity of the le and copies the le from RAM to ash memory.
10
SYNCHRONISERS, DELAYS &
SILENCE DETECTORS
SYNCHRONISERS, DELAYS & SILENCE DETECTORS - RB-DSD1