Handbook

Redbox User Handbook No 1
127
Source Label: The source which is currently being used is displayed here.
Remote Start & Stop: The remote start and remote stop signals are displayed in the remote
indicator panel. When either of these signals is active, the relevant led will be lit.
Synchronization options are displayed in the sync indicator panel:
Mode: This displays the selected sync mode.
Source: This displays the selected sync source. This is disabled in Master mode.
Sample Rate: This displays the current output sample rate.
Sync Source Locked LED: If the synchronization source is locked this LED will be lit.
Restore: The Restore button can be used to complete the restore function if the unit is in
manual mode. The LED (to the left of the button) will ash if the unit is ready to be restored.
If the LED is lit continuously, the unit is in auto mode.
Serial Mode: The serial mode LED indicates whether the unit is in serial mode.
Unit Setup Page
Fig 10-11: Unit Setup Page
The control page is where you can congure your unit. For ease of use, the options have
been split into four sections:
10
SYNCHRONISERS, DELAYS &
SILENCE DETECTORS
SYNCHRONISERS, DELAYS & SILENCE DETECTORS - RB-DSD1