Handbook

Redbox User Handbook No 1
123
Command Description Response
MOS:nn Mono or stereo selection where -ACK:
nn selects between the two options where:
00 = Mono mode
01 = Stereo mode
NOS:nn No switch on failure where -ACK:
nn selects between the two options where:
00 = Switch on failure
01 = No switch on failure
OCL:nn one channel (left or right) lost mode where -ACK:
nn selects between two options where:
00 = Mute the lost channel
01 = Send remaining channel to the other (dual mono)
REM:nm Remote Control options where -ACK:
n selects which option is being set where:
1 = Remote start mode
2 = Remote stop mode
3 = Remote Restore select
m selects the state of the option chosen where:
0 = Option deselected or o
1 = Option selected
RTx:nnn -ACK:
x sets the channel which is being changed where:
1 = MAIN
2 = AUX
nnn sets the amount of seconds it takes for the
channel to recover in seconds
SPM:nm Special mode selection where -ACK:
n selects which modes is being selected where:
1 = signal detection mode
2 = Force main mode
3 = Emergency program override
4 = Detection enabled/disabled mode
m selects the state of the option chosen where:
0 = Mode turned o
1 = Mode selected
10
SYNCHRONISERS, DELAYS &
SILENCE DETECTORS
SYNCHRONISERS, DELAYS & SILENCE DETECTORS - RB-DSD1