Handbook

92
Redbox RB-PD2 User Handbook
SYNCHRONISERS, DELAYS &
SILENCE DETECTORS
SYNCHRONISERS, DELAYS & SILENCE DETECTORS - RB-PD2
8
Command Description Response
RSR:n Set record sample rate where: ACK: or NAK:
n = 0 (32 kHz)
n = 1 (44.1 kHz)
n = 2 (48 kHz)
RSW:n Set record sample width where: ACK: or NAK:
n = 0 (16 bit)
n = 1 (24 bit)
SAM:n Set analogue mute where: ACK: or NAK:
n = 0 (o )
n = 1 (on)
SDB:n Set dump buer length where: ACK: or NAK:
n = dump length in milliseconds
(100ms resolution)
SDF:c Set dump play le where: ACK: or NAK:z
c = “\path\lename” (c=“\lename” for les
in root directory)
z = error message
SER: **Serial number request where: SER:z
z = serial number (6 digits)
SDM:n Set digital mute where: ACK: or NAK:
n = 0 (o )
n = 1 (on)
SIP:n Set input peak digits where: ACK: or NAK:
n = 0 (+12dB)
n = 1 (+18dB)
n = 2 (+24dB)
SMD:n Set dump mode where: ACK: or NAK:
n = 0 (dump buer)
n = 1 (play le)
SMS:n Set start delay mode where: ACK: or NAK:z
n = 0 (build using audio
stretch algorithm)
n = 1 (play le)
z = error message