Handbook

84
Redbox RB-PD2 User Handbook
SYNCHRONISERS, DELAYS &
SILENCE DETECTORS
SYNCHRONISERS, DELAYS & SILENCE DETECTORS - RB-PD2
8
New Recording
00:00:00
REC
DURATION:
FILENAME: RECD0001.WAV
FORMAT: AN 48KHZ 24BIT
L
R
Fig 8-8: The Record Screen
This option enters the record screen provided a valid Compact Flash™ memory card is
inserted in the front panel Compact Flash™ memory card slot. An error message will be
displayed if no memory card is present, or a new record audio le cannot be initialized, or
the maximum number of recordings already exists in the current directory, or insucient
space exists.
The record screen shows the lename that the audio will be recorded to as well as the
record parameters that are currently set. The PPM display at the top of the record screen
gives a visual indication of the audio levels for the selected source with the line on the scale
indicating the 0dB point. In record mode, the DUMP/DROP button doubles as a control for
the record process. To start recording, press the button once. The button illuminates, the
record pause icon is cleared and the recording starts with the on-screen duration indicating
the length of the recording. To stop the recording, press the DUMP/DROP button again. The
new audio le is saved, the record mode is exited and the main default screen is displayed.
To exit the record screen prior to starting record, press and hold the rotary control for 1.5
seconds. Position the highlight over EXIT RECORD and press the rotary control.
Source
This option selects which input is used for the record process. From the record sub-menu
select SOURCE. The available options are ANALOGUE, ANALOGUE SYNC and DIGITAL.
The analogue and digital outputs are muted whilst in record mode.
l Analogue – This selects the audio at the analogue inputs as the source for recording.
The input is sampled using the selected record sample rate generated from an internal
master clock. The digital input is not used.
l Analogue Sync – This selects the audio at the analogue inputs as the source for
recording. The input is synchronized to the digital audio sync signal at the
digital input.
l Digital – This selects the audio at the digital input as the source for recording.
The analogue inputs are not used.
The default record source is analogue.