Datasheet

Tel: [phone] Fax: [phone] Email: [e-mail] Internet: www.sonifex.co.uk
STUDIO ILLUMINATED SIGNS
STUDIO ILLUMINATED SIGNS
Physical Specication
Power Input: 5-7V DC
40cm Sign: 500mA max
Input Connector: 4 way screw terminal block
Control Inputs: 2 x pull-down to 0V
Dimensions Small Single: 20cm (W) x 8cm (H)
(Perspex): Large Single: 40cm (W) x 8cm (H)
Dimensions 39cm (W) x 20cm (D) x 11cm (H)
(Boxed 20cm): 15.4” (W) x 7.9” (D) x 4.3” (H)
Dimensions 60cm (W) x 20cm (D) x 11cm (H)
(Boxed 40cm): 23.6” (W) x 7.9” (D) x 4.3” (H)
Weight (20cm): Nett: 0.35kg Gross: 0.85kg
Nett: 0.8lb Gross: 1.9lb
Weight (40cm): Nett: 0.55kg Gross: 1.15kg
Nett: 1.2lb Gross: 2.6lb
Equipment Type
Single Flush Mounting Signs (40cm):
LD-40F1REC 40cm ‘RECORD’ Sign
LD-40F1ONA 40cm ‘ON AIR’ Sign
LD-40F1MCL 40cm ‘MIC LIVE’ Sign
LD-40F1PHN 40cm ‘PHONE’ Sign
LD-40F1TRF 40cm ‘TRAFFIC FLAG ON’ Sign
LD-40F1ADB 40cm ‘AD BREAK’ Sign
LD-40F1REH 40cm ‘REHEARSAL’ Sign
LD-40F1DOR 40cm ‘DOOR’ Sign
LD-40F1OBT 40cm ‘OBIT’ Sign
LD-40F1NOE 40cm ‘NO ENTRY’ Sign
LD-40F1EXIT 40cm ‘EXIT’ Sign
LD-40F1SIL 40cm ‘SILENCE PLEASE’ Sign
LD-40F1MET 40cm ‘MEETING IN PROGRESS’ Sign
LD-40F1INT 40cm ‘INTERVIEW IN PROGRESS’ Sign
Twin Flush Mounting Signs (2 x 20cm):
LD-40F2TX-REH 2 x 20cm ‘TX’ & ‘ REH’ Sign
LD-40F2ONA-MCL 2 x 20cm ‘ON AIR’ & ‘MIC LIVE’ Sign
Single Flush Mounting Signs (20cm):
LD-20F1REC 20cm ‘RECORD’ Sign
LD-20F1ONA 20cm ‘ON AIR’ Sign
LD-20F1MCL 20cm ‘MIC LIVE’ Sign
Mounting Kits:
LD-KE1 End Mounting Kit For 40cm Or 20cm
Flush Mounting Signs
LD-KC1 Ceiling Mounting Kit For 40cm Or
20cm Flush Mounting Signs
LD-IT LED Sign End Mounting Installation
Tool
Programming Control:
LD-RPC Remote Programming Controller
Technical Specication For
SignalLED Range
Custom single ush mounting 40cm sign.
LD-40F2TX-REH Flush mounting 40cm
twin sign.
LD-KC1 Ceiling Mounting Kit
The LD-KC1 mounting kit can be used to
attach a 40cm or 20cm ush mounting
sign to the ceiling or a desktop.
The LD-KC1 mounting kit.
The LD-KC1 mounting kit - desktop mounted.
The LD-KC1 mounting kit - ceiling mounted.
LD-20F1REC Single ush mounting 20cm
‘RECORD’ sign.
Sign Wording
A number of standard signs are available
with the following wording: RECORD, ON
AIR, MIC LIVE, PHONE, TRAFFIC FLAG ON,
AD BREAK, REHEARSAL, DOOR, OBIT, NO
ENTRY, EXIT, SILENCE PLEASE, MEETING IN
PROGRESS and INTERVIEW IN PROGRESS.
If you need dierent text, or graphics, then
you can order a Custom sign.
Custom Signs
Custom signs, for example with your
company name or logo, can be produced for
a nominal setup fee. Contact Sonifex with
your requirements.
How to Order
Just select the name of the sign from the
list given in the technical specication and
email Sonifex at [e-mail].
LD-KE1 End mounting kit.
End mounting 40cm single sign
(Created from single ush mounting
LD-40F1ONA sign & LD-KE1 kit).
LD-KE1 End Mounting Kit
A mounting kit
is available,
LD-KE1, to
mount the
standard ush
mounted sign
perpendicular to a wall.
LD-IT Installation Tool
An installation tool,
the LD-IT can be
used to hold the
sign in place on the
wall-mount whilst you wire it up.
Controller must be
used. This allows a much
simpler way of programming any sign using
a simple hand-held remote control. Please
note that the control is sold separately and
one control can program multiple signs.
New Remote Programming Controller
The signs are precongured to display
certain colours when the control inputs are
active. Information on the colours shown
can be found on the Sonifex website. Prior
to 1st December 2010, the display mode
and colour options could then be varied
using an 8 way DIPswitch, accessible during
installation. From 1st December 2010, this is
dierent - the signs are still precongured,
but to vary the colours and switching
modes, the LD-RPC Remote Programming
New
Programming
Method