User Guide

Page 2 - SonicWALL VPN Client Tech Note
the update will be displayed at the bottom of the Web browser window.
3. Click the Configure tab at the top of your screen. A window similar to the following will be displayed.
4. On the Configure page, create a new Security Association by selecting Add New SA from the Security
Association menu.
5. Select IKE from the IPSec Keying Mode menu.
6. Enter a descriptive name that identifies the VPN client in the Name field, such as the client’s location or
name.
7. Leave the Destination Network, Destination Subnet Mask, and IPSec Gateway Address fields blank.
8. Select Encrypt and Authenticate (ESP DES HMAC MD5) from the Encryption Method drop down menu.
9. Define a shared secret in the Shared Secret field. The alphanumeric shared secret must match the VPN client’s
Shared Key and may contain up to 128 characters. Create a Shared Secret that can not be guessed by