Users Manual

4 Mounting Options
Flat Surface Option
Place the TZ on a flat surface. Allow unrestricted airflow
around the unit, leaving a minimum of 1 inch (25.44mm)
clearance on all sides.
5 Connectivity and Power
1. Connect Power
2. C
onnect Interfaces
For a wireless TZ, connect the antennas to your TZ.
Connect the TZ WAN interface (X1 or X2) to the Internet.
CAUTION: Only use the power adapter included with this appliance. Do
not use a power adapter that is damaged or from another appliance.
6 Setup Options
Setup using Local Management
Set up and manage your TZ by connecting it to a
management computer via Ethernet cable.
To minimize scrolling, set your screen resolution
to at least 1920 x 1080 pixels.
Setup using Cloud Management
Use SonicWall Capture Security Center (CSC)
with Zero Touch to manage and configure your
TZ.
Setup using SonicExpress App
Use SonicWall SonicExpress on your
smartphone to register and configure your TZ.
NOTE: After initial setup, be sure to download the latest
firmware from MySonicWall and upgrade your TZ.
7 Local Management
1 Connect the TZ LAN interface (X0) to your computer.
Your computer should be configured to accept DHCP
addressing.
2Navigate to https://192.168.168.168 in your web
browser and log in with the default credentials:
3Username: admin
Password: password
4 Launch the Setup Guide
wizard or manually
configure to complete
initial configuration.
5 In SonicOS, click Register and log in with your
MySonicWall credentials to register your TZ.
Your TZ is now initialized and ready for use!
8 Cloud Management
Use Capture Security Center (CSC) with Zero
Touch to manage and configure your TZ.
1 Log into CSC at cloud.sonicwall.com
using your MySonicWall credentials.
2 Select the mySonicWall tile to register your TZ.
3 Enable Zero Touch and NSM licensing on your TZ in
MySonicWall.
4 Select the Network Security Manager tile in CSC to
manage your TZ from the cloud.
NOTE: This option requires a Cloud Management license.
9 SonicExpress App
Use SonicExpress on your smartphone to
register and configure your TZ.
1 Download and launch the SonicExpress App on your iOS
or Android device.
2Tap Login and log in with your MySonicWall credentials,
then select the Tenant for the TZ. Tenants can contain
multiple SonicWall appliances.
3 Connect your iOS/Android device to the TZ with the
smartphone USB cable (not supplied with the TZ).
4Use the SonicExpress Se
tup Guide to register the TZ,
synchronize service licenses, change the password, and
configure essential interface settings.
10 Secure SD-Branch
SD-Branch combines SD-WAN, SD-LAN, unified
security and centralized management for
distributed enterprises. For more information, see:
https://www.sonicwall.com/solutions/use-cases/secure-sd-branch
NOTE: Use your mobile device USB cable.
232-005484-50_RevA_TZ270-370-470_Series_QuickStartGuide.fm Page 2 Tuesday, October 20, 2020 11:40 AM