User Guide

Network Access Rules Page 89
SonicWALL TELE3 and SOHO3 IP Address Management
The SonicWALL TELE3 has a five node license which is cannot be upgraded. The SonicWALL
SOHO3 10-user license and 50-user license allow a maximum of 10 and 50 LAN IP
addresses to access the Internet, respectively. The SonicWALL cannot differentiate
between IP addresses designated for Internet access and IP addresses intended for LAN
access only. You can define a Rule to prevent IP addresses from counting toward the
SonicWALL SOHO3 IP license limit.
1. Click Add New Rule in the Rules window to launch the "Add Network Access
Rule" window.
2. Select Deny from the Action menu.
3. Select Default from the Service menu to block all outbound connections.
4. Select LAN from the Source Ethernet menu.
5. Enter the starting IP address of the range to be blocked in the Source Addr Range
Begin field and the ending IP address of the range in the Source Addr Range End
field. For instance, if you are using the 192.168.168.101 through 192.168.168.150 for
IP addresses on the LAN, enter 192.168.168.101 as the beginning address and
192.168.168.150 as the ending address.
6. Select * from the Destination Ethernet menu.
7. Enter * from the Destination Addr Range Begin field.
8. Select always from the Apply this rule menu to ensure continuous enforcement.
9. Click Update to add your new rule.
integrated_manual.book Page 89 Friday, October 12, 2001 2:56 PM