User Guide

Web Management Tools Page 67
Restoring Factory Default Settings
You can erase the SonicWALL configuration settings and restore the SonicWALL to its
factory default state.
1. Click Restore on the Preferences tab to restore factory default settings.
2. Click Yes, and then restart the SonicWALL for the change to take effect.
Note: The SonicWALL LAN IP Address, LAN Subnet Mask, and the Administrator Password
are not reset.
Updating Firmware
The SonicWALL has flash memory and can be easily upgraded with new firmware. Current
firmware can be downloaded from SonicWALL, Inc. Web site directly into the SonicWALL.
Note: Firmware updates are only available to registered users. You can register your
SonicWALL online at <http://www.mysonicwall.com>
.
1. Click Tools on the left side of the browser window, and then click the Firmware
tab.
integrated_manual.book Page 67 Friday, October 12, 2001 2:56 PM