User Guide

General and Network Settings Page 44
by default. To remove an NTP server, highlight the IP address and click Delete NTP
Server.
When you have configured the Time window, click Update. Once the SonicWALL has been
updated, a message confirming the update is displayed at the bottom of the browser
window.
Setting the Administrator Password
1. Click the Password tab.
To set the password, enter the old password in the Old Password field, and the new
password in the New Password field. Type the new password again in the Confirm New
Password field and click Update. Once the SonicWALL has been updated, a message
confirming the update is displayed at the bottom of the browser window.
Note: When setting the password for the first time, remember that the SonicWALL's
default password is “password”.
If the password is not entered exactly the same in both New Password fields, the
password is not changed. If you mistype the password, you are not locked out of the
SonicWALL.
Warning: The password cannot be recovered if it is lost or forgotten. If the password is
lost, you must to reset the SonicWALL to its factory default state. Go to Appendix E for
instructions.
integrated_manual.book Page 44 Friday, October 12, 2001 2:56 PM