User Guide

General and Network Settings Page 42
2. Configure the LAN Settings by typing in the IP addresses for the SonicWALL LAN and
the LAN Subnet Mask.
3. Type the IP address for the WAN in the WAN Gateway (Router) Address field. Then
enter the IP address for the SonicWALL WAN IP (NAT Public) Address, and the
WAN/DMZ Subnet Mask.
4. Configure the DNS Settings by typing the DNS Server IP address into the DNS
Server field.
5. Enter the IP address of the L2TP Server into the L2TP Server IP Address field. Also,
enter the User Name and User Password into the User Name and User Password
fields.
6. You can select the Disconnect after __ minutes of inactivity check box, and also
enter a value in minutes to disconnect an inactive user. The default value is 10 minutes.
7. Click Update to add the settings to the SonicWALL. The L2TP Gateway Address,
L2TP SonicWALL IP Address, and the L2TP DNS Server addresses are configured
once the connection is established between the SonicWALL and the L2TP server.
integrated_manual.book Page 42 Friday, October 12, 2001 2:56 PM