User Guide

SonicWALL Internet Security Appliance User’s Guide Page 23
Configuring WAN Network Settings
If you selected either NAT or Standard mode, the Getting to the Internet window is
displayed.
11. Enter the valid IP address provided by your ISP in the Getting to the Internet
window. Enter the SonicWALL WAN IP Address, WAN/DMZ Subnet Mask, WAN
Gateway (Router) Address, and DNS Server Addresses. Click Next to continue.
If NAT is disabled, go to Step 13. If Standard mode is selected, go to Step 14.
Setting the User Name and Password for PPPoE
If you select NAT with PPPoE in the Connecting to the Internet window, the
SonicWALL ISP Settings (PPPoE) window is displayed
.
12. Enter the User Name and Password provided by your ISP. The Password is case-
sensitive. Click Next and go to Step 13.
integrated_manual.book Page 23 Friday, October 12, 2001 2:56 PM