User Guide

SonicWALL Installation Page 22
The Use Network Address Translation (NAT) window verifies that the SonicWALL has
a registered IP address. To confirm this, click Next and go to Step 10.
Selecting Standard or NAT Enabled Mode
If you selected Assigned you a single static IP Address in Step 6, the Optional-
Network Address Translation window is displayed.
10. The Optional-Network Address Translation (NAT) window offers the ability to
enable NAT. Select Don’t Use NAT if there are enough static IP addresses for your
SonicWALL, all PCs, and all network devices on your LAN. Selecting Don’t Use NAT
enables the Standard mode. Select Use NAT if valid IP addresses are in short supply
or to hide all devices on your LAN behind the SonicWALL valid IP address. Click Next
to continue.
integrated_manual.book Page 22 Friday, October 12, 2001 2:56 PM