User Guide

Hardware Description Page 169
Connects to the external power supply that is provided with the SonicWALL PRO 100.
The use of an Uninterruptible Power Supply (UPS) is recommended to protect the
SonicWALL PRO 100 against damage or loss of data due to electrical storms, power
failures, or power surges.
• Cooling Vents
• The SonicWALL PRO 100 is convection cooled; an internal fan is not necessary. Do
not block the cooling vents.
SonicWALL SOHO3 and TELE3 Front Panel
The SonicWALL SOHO3 front panel is shown below, followed by a description of each item.
The SonicWALL TELE3 is identical to the SonicWALL SOHO3 except for the TELE3 label
on the front panel and the inclusion of SonicWALL VPN.
SonicWALL SOHO3 and SonicWALL TELE3 Front Panel Description
• Power
Lights up when power is applied to the SonicWALL SOHO3 or SonicWALL TELE3.
• Test
Lights up when the SonicWALL is first powered up and performing diagnostic tests to
check for proper operation. These tests take about 90 seconds. If the Test LED remains
lit after this time, the software is corrupt and must be reinstalled. This process is
described in Appendix E.
Power LED
WAN Port LEDs
Link, 100, Activity
LAN Port LEDs
Link, 100, Activity
Test LED
integrated_manual.book Page 169 Friday, October 12, 2001 2:56 PM