User Guide

Hardware Description Page 165
13 Hardware Description
This chapter provides detailed illustrations and descriptions of the SonicWALL
Internet Security Appliances front and back panels by model. Refer to this chapter
to learn about where the LEDs, switches, and connectors are located.
More information is provided in Appendix A, Technical Specifications.
SonicWALL PRO 200 and SonicWALL PRO 300 are described on the following
pages; SonicWALL PRO 100, on pages 155-156; and SonicWALL SOHO3 and
SonicWALL TELE3 on pages 157-158.
SonicWALL PRO 200 and PRO 300 Front Panel
The SonicWALL PRO 200 front panel is shown below, followed by a description of
each item. The SonicWALL PRO 300 is identical to the SonicWALL PRO 200 except
for the PRO 300 label on the front panel and the inclusion of VPN accelerator
hardware and an additional 8MB of RAM.
SonicWALL PRO 200 and SonicWALL PRO 300 Front Panel Description
• Power
Lights up when power is applied to SonicWALL PRO or SonicWALL PRO 300.
• Test
Lights up when the SonicWALL is powered up and performing diagnostic tests
to check for proper operation. These tests take about 90 seconds. If the Test
LED remains lit after this time, the software is corrupt and must be reinstalled.
This process is described in Appendix E.
Power, Test, and
Alarm LEDs
WAN Port LEDs
Link, Activity
DMZ Port LEDs
Link, Activity
LAN Port LEDs
Link, Activity
integrated_manual.book Page 165 Friday, October 12, 2001 2:56 PM