User Guide

SonicWALL VPN Page 155
An optional secondary RADIUS server can be defined if a backup RADIUS server exists on
the network.
1. Enter the IP address or domain name of the secondary RADIUS server in the IP
Address/name field.
2. Enter the UDP port number that the secondary RADIUS server listens on. The Steel-
Belted RADIUS server is set, by default, to listen on port 1645.
3. Enter the secondary RADIUS server administrative password or "shared secret" in the
Shared Secret field. The alphanumeric Shared Secret can range from 1 to 30
characters in length. The Shared Secret is case sensitive.
RADIUS Client Test
You can test your RADIUS Client user name and password by typing in a valid User name
in the User field, and the Password in the Password field. If the validation is successful,
the Status messages changes to Success. If the validation fails, the Status message
changes to Failure.
Once the SonicWALL has been configured, a Security Association requiring RADIUS
authentication prompts incoming VPN clients to enter a User Name and Password into
a dialogue box.
integrated_manual.book Page 155 Friday, October 12, 2001 2:56 PM