User Guide

Page 148 SonicWALL Internet Security Appliance User’s Guide
• Route all internet traffic through this SA if forcing internet traffic from the WAN
to use this SA to access a remote site.
• Enable Perfect Forward Secrecy - if you want to add another layer of security by
adding an additional Diffie-Hellman key exchange.
• Phase 2 DH Group - select the type of DH key exchange in Phase 2 for Perfect
Forward Secrecy.
• Default LAN Gateway - if specifying the IP address of the default LAN route for
incoming IPSec packets for this SA. This is used in conjunction with the Route all
traffic through this SA check box.
14. Click Update to add the remote network and close the VPN Destination Network
window. Once the SonicWALL TELE3 has been updated, a message confirming the
update is displayed at the bottom of the browser window.
Note: Since Window Networking (NetBIOS) has been enabled, users can view remote
computers in their Windows Network Neighborhood. Users can also access resources
on the remote LAN by entering servers' or workstations remote IP addresses.
integrated_manual.book Page 148 Friday, October 12, 2001 2:56 PM