User Guide

DHCP Server Page 111
The scrolling window shows the details on the current bindings: IP and MAC address of the
bindings, along with the type of binding (Dynamic, Dynamic BootP, or Static BootP).
To delete a binding, which frees the IP address in the DHCP server, select the binding from
the list, and then click Delete Binding. The operation takes a few seconds to complete.
Once completed, a message confirming the update is displayed at the bottom of the Web
browser window.
Click Refresh to reload the list of bindings. This can be necessary because Web pages are
not automatically refreshed, and new bindings can have been issued since the page was
first loaded.
SonicWALL TELE3 and SOHO3 IP Address Management
If the computers on your LAN receive an IP address from a DHCP server, you can limit the
range of IP addresses assigned to these computers. For example, if you have a SOHO3 with
a 10-node or 50-node license, configure the range of IP addresses to reflect the number of
node licenses. If you have a 10-node license, use a range of IP addresses from
192.168.168.1 to 192.168.168.10. If you have a 50-node license, use a range of IP
addresses from 192.168.168.1 to 192.168.168.50.
Otherwise, a single computer can use up several node licenses for several IP addresses it
can receive from the DHCP server.
integrated_manual.book Page 111 Friday, October 12, 2001 2:56 PM