User Guide

Page 102 SonicWALL Internet Security Appliance User’s Guide
Click Advanced on the left side of the browser window, and then click the DMZ
Addresses tab.
Servers on the DMZ must have unique, valid IP addresses in the same subnet as the
SonicWALL WAN IP Address. Your ISP should be able to provide these IP addresses, as well
as information on setting up public servers.
To configure DMZ Addresses, complete the following instructions.
1. Enter the starting IP address of your valid IP address range in the From Address field.
2. Enter the ending IP address of your valid IP address range in the To Address field.
Note: You can enter an individual IP address in the From Address field only.
3. Click Update. Once the SonicWALL has been updated, a message confirming the up-
date is displayed at the bottom of the browser window.
If you receive an error when you click Update, confirm that the DMZ Address Range
does not include the SonicWALL WAN IP Address, the WAN Gateway (Router) Address, or
any IP addresses assigned on the One-to-One NAT or Intranet windows.
Note: The SonicWALL supports up to 64 DMZ address ranges.
integrated_manual.book Page 102 Friday, October 12, 2001 2:56 PM