User Guide
Table Of Contents
- Check Package Contents
- Any Items Missing?
- What You Need to Begin
- Record Configuration Information
- Overview of the SonicWALL Email Security Appliance
- Before You Register
- Creating a mysonicwall.com Account
- Registering Your SonicWALL Email Security Appliance
- Activating Your SonicWALL Email Protection Subscription and Dynamic Support
- Apply Power to the SonicWALL Email Security Appliance
- Connect Directly to the SonicWALL Email Security Appliance
- Login to the SonicWALL Email Security Appliance
- Navigate the SonicWALL Email Security Interface
- Change the Default Administrator Password
- Enter the License Keys for Each Service
- Set the Time and Date
- Use Quick Configuration to Set Up Email Management
- Verify Your SonicWALL Email Security Appliance Configuration
- Route Mail to Your SonicWALL Email Security Appliance
- Verify Mail from the Internet Through Your SonicWALL Email Security Appliance
- Configure Outbound Mail Filtering
- Windows XP
- Windows 2000
- Windows NT
- Weitere Hinweise zur Montage der Modell
- FCC Part 15 Class A Notice
- Notice About Modifying Equipment
- BMSI Statement
- VCCI Statement
- Canadian Radio Frequency Emissions Statement
- Regulatory Information for Korea
- Lithium Battery Warning
- Cable Connections
- German Language Regulatory and Safety Instructions
Page 10
Setting Up the SonicWALL Email Security Appliance
In this section, you will:
• “Apply Power to the SonicWALL Email Security Appliance” on page 10
• “Connect Directly to the SonicWALL Email Security Appliance” on page 10
• “Login to the SonicWALL Email Security Appliance” on page 11
• “Change the Default Administrator Password” on page 13
• “Enter the License Keys for Each Service” on page 14
Apply Power to the SonicWALL Email Security Appliance
1. Plug the power cord into the back of the SonicWALL Email Security appliance and
into an appropriate power outlet.
2. Turn on the power switch on the front, top, right corner of the appliance.
The Power LED on the front panel lights up green when you power on the
SonicWALL Email Security appliance. The HDD LED lights up and may blink
while the appliance performs a series of diagnostic tests. When the HDD LED is no
longer lit, the SonicWALL Email Security appliance is ready for configuration.
Connect Directly to the SonicWALL Email Security Appliance
The SonicWALL Email Security appliance comes configured with an IP address of
192.168.168.169. Before you can connect your management station to it, you must
configure your management station to have an address in the same subnet.
1. Make a note of your computer’s current network settings.
2. Set the computer you use to manage the SonicWALL Email Security appliance to
have a static IP address in the 192.168.168.x range, such as 192.168.168.50 and a
netmask of 255.255.255.0. For help with setting up a static IP address on your
computer, refer to “Configuring a Static IP Address” on page 30.
3. Using the supplied crossover cable and the computer you are using to administer the
SonicWALL Email Security appliance, connect the LAN port on the computer to the
LAN port on the back of your SonicWALL Email Security appliance.
3