User's Manual
Safety and Regulatory Information for the SonicWALL TZ 105W Wireless Appliance
Regulatory Model/Type Product Name
APL22-09C TZ 105W
Mounting the SonicWALL
Mount in a location away from direct sunlight and sources of heat. A maximum ambient temperature of 104º F (40º C) is recommended.
Route cables away from power lines, fluorescent lighting fixtures, and sources of noise such as radios, transmitters, and broadband
amplifiers
The included power cord is intended for use in North America only. For European Union (EU) customers, a power cord is not included.
Ensure that no water or excessive moisture can enter the unit.
Allow unrestricted airflow around the unit and through the events on the side of the unit. A minimum of 1 inch (25.44mm) clearance is
recommended.
Consideration must be given to the connection of the equipment to the supply circuit and the effect of overloading the circuits has minimal
impact on over current protection and supply wiring. Appropriate consideration of equipment nameplate ratings must be used when
addressing this concern.
Cable Connections
All Ethernet and RS232 (Console) cables are designed for intrabuilding connection to other equipment. Do not connect these ports directly to
communication wiring or other wiring that exits the building where the SonicWALL is located.
Power Supply Information for APL22-09C
If the power supply is missing from your SonicWALL product package, please contact SonicWALL Technical Support at408-752-7819 for a
replacement. This product should only be used with a UL listed power supply marked “Class 2” or “LPS”, with an output rated 12 VDC, minimum
1.5 A, Tma: minimum40 degrees C.
LithiumBatteryWarning
The Lithium Battery used in the SonicWALL Internet security appliance may not be replaced by the user. The SonicWALL must be returned to a
SonicWALL authorized service center for replacement with the same or equivalent type recommended by the manufacturer. If, for any reason, the
battery or SonicWALL Internet security appliance must be disposed of, do so following the battery manufacturer's instructions.