User Manual

Safety and Regulatory Information for the SonicWALL NSA 220W Wireless Appliance
Regulatory Model/Type Product Name
APL24-08F NSA 220W
Mounting the SonicWALL
 Mount in a location away from direct sunlight and sources of heat. A maximum ambient temperature of 104º F (40º C) is recommended.
 Route cables away from power lines, fluorescent lighting fixtures, and sources of noise such as radios, transmitters, and broadband
amplifiers
 The included power cord is intended for use in North America only. For European Union (EU) customers, a power cord is not included.
 Ensure that no water or excessive moisture can enter the unit.
 Allow unrestricted airflow around the unit and through the events on the side of the unit. A minimum of 1 inch (25.44mm) clearance is
recommended.
 Consideration must be given to the connection of the equipment to the supply circuit and the effect of overloading the circuits has minimal
impact on over current protection and supply wiring. Appropriate consideration of equipment nameplate ratings must be used when
addressing this concern.
Cable Connections
All Ethernet and RS232 (Console) cables are designed for intrabuilding connection to other equipment. Do not connect these ports directly to
communication wiring or other wiring that exits the building where the SonicWALL is located.
Power Supply Information for APL24-08F
If the power supply is missing from your SonicWALL product package, please contact SonicWALL Technical Support at408-752-7819 for a
replacement. This product should only be used with a UL listed power supply marked “Class 2” or “LPS”, with an output rated 12 VDC, minimum
3.0 A, Tma: minimum40 degrees C.
