User Guide
Table Of Contents
- SonicWALL TZ 190 Wireless Getting Started Guide
- Before You Begin
- Checking Package Contents
- Any Items Missing?
- Recording Configuration Information
- Recording Internet Service Provider (ISP) Information
- Overview of the SonicWALL TZ 190 Wireless Appliance
- WWAN PC Card Setup
- Sprint Wireless PC Card Setup
- Cingular Wireless PC Card Setup
- Verizon Wireless PC Card Setup
- Before You Register
- Creating a mysonicwall.com Account
- Registering Your SonicWALL TZ 190 Wireless Appliance
- Insert the WWAN PC Card Modem
- Apply Power to the SonicWALL TZ 190 Wireless
- Connect Directly to the SonicWALL TZ 190 Wireless Appliance
- Log into the SonicWALL TZ 190 Wireless Appliance
- If the SonicWALL Configuration Wizard Does Not Appear
- SonicWALL TZ 190 Wireless Setup Wizard
- Configuring WWAN as Failover
- Configuring LAN Settings
- Log Into the Management Interface
- WWAN Connection Status
- Manage WWAN Connection
- Check Internet Connectivity
- Windows XP
- Windows 2000
- Windows NT
- Safety Instructions and Regulatory Information
DRAFT not for production
Page 34
Configuring LAN Settings
By default, your SonicWALL TZ 190 Wireless is configured with a LAN network IP
address, 192.168.168.168, and subnet mask, 255.255.255.0, which will work well for
most installations. In most cases, you can leave the default LAN IP address and
subnet mask unchanged.
1. Configure as follows:
Note: Record the LAN IP address in a safe place, this is the IP address you will use to
access the SonicWALL TZ 190 Wireless management interface.
2. Click the Next button to continue.
SonicWALL LAN
IP Address
Enter an IP address for the LAN interface of your
SonicWALL TZ 190 appliance.
Record the address: .
LAN Subnet Mask Enter a subnet mask for your LAN interface.