User Guide
Table Of Contents
- SonicWALL TZ 190 Wireless Getting Started Guide
- Before You Begin
- Checking Package Contents
- Any Items Missing?
- Recording Configuration Information
- Recording Internet Service Provider (ISP) Information
- Overview of the SonicWALL TZ 190 Wireless Appliance
- WWAN PC Card Setup
- Sprint Wireless PC Card Setup
- Cingular Wireless PC Card Setup
- Verizon Wireless PC Card Setup
- Before You Register
- Creating a mysonicwall.com Account
- Registering Your SonicWALL TZ 190 Wireless Appliance
- Insert the WWAN PC Card Modem
- Apply Power to the SonicWALL TZ 190 Wireless
- Connect Directly to the SonicWALL TZ 190 Wireless Appliance
- Log into the SonicWALL TZ 190 Wireless Appliance
- If the SonicWALL Configuration Wizard Does Not Appear
- SonicWALL TZ 190 Wireless Setup Wizard
- Configuring WWAN as Failover
- Configuring LAN Settings
- Log Into the Management Interface
- WWAN Connection Status
- Manage WWAN Connection
- Check Internet Connectivity
- Windows XP
- Windows 2000
- Windows NT
- Safety Instructions and Regulatory Information
DRAFT not for production
Page 16
Verifying Your Connection
After the card has been set up on your PC, you can view your connection type and verify
that the WWAN PC Card is transferring data.
Alert: In order for the connection testing to be valid, it is important that you first disable
all other network connections, such as a Wi-Fi or LAN connection, before
continuing. Leave only your PC card connection enabled.
1. If the Cingular Communications Manager program is running, skip to the next step.
Otherwise, navigate to Start > Programs > Cingular > Cingular Communications
Manager to start the Communications Manager program.
The WWAN PC card will take a few minutes to connect to the Cingular network. When
the connection is ready, the status will read “Ready: Cingular Accelerated”.
2. Click the Connect button to enable the network connection.
3. In the Windows interface, select Start > Run.
4. Enter “cmd” in the Open field and click the OK button.
5. At the prompt, type the command “ipconfig” and press Enter on the keyboard. Your
network device status will display.
6. Verify that you have obtained an IP Address for your Ethernet adaptor.
7. Verify that all other Local Area Network Connections display “Media disconnected”
as their status.
Note: The name of your Ethernet adaptor may differ from the screenshot below.
Common names for newly acquired cards are “Local Area Connection 2” or
“Local Area Connection 3”.
8. Open a Web-browser and navigate to a website, such as
<http://www.sonicwall.com> to verify that your connection can transfer data.
Congratulations! You have set up and provisioned your WWAN PC card. Continue with
“Setting Up Your SonicWALL TZ 190 Wireless Appliance” on page 23.