User Guide
Table Of Contents
- SonicWALL TZ 190 Wireless Getting Started Guide
- Before You Begin
- Checking Package Contents
- Any Items Missing?
- Recording Configuration Information
- Recording Internet Service Provider (ISP) Information
- Overview of the SonicWALL TZ 190 Wireless Appliance
- WWAN PC Card Setup
- Sprint Wireless PC Card Setup
- Cingular Wireless PC Card Setup
- Verizon Wireless PC Card Setup
- Before You Register
- Creating a mysonicwall.com Account
- Registering Your SonicWALL TZ 190 Wireless Appliance
- Insert the WWAN PC Card Modem
- Apply Power to the SonicWALL TZ 190 Wireless
- Connect Directly to the SonicWALL TZ 190 Wireless Appliance
- Log into the SonicWALL TZ 190 Wireless Appliance
- If the SonicWALL Configuration Wizard Does Not Appear
- SonicWALL TZ 190 Wireless Setup Wizard
- Configuring WWAN as Failover
- Configuring LAN Settings
- Log Into the Management Interface
- WWAN Connection Status
- Manage WWAN Connection
- Check Internet Connectivity
- Windows XP
- Windows 2000
- Windows NT
- Safety Instructions and Regulatory Information
DRAFT not for production
Page 14
Cingular Wireless PC Card Setup
Complete the following steps to set up and provision your Cingular Wireless
3G PC card. Contact your PC card vendor for troubleshooting help with this section.
Alert: DO NOT insert your PC Card modem into the computer until you have
completed the setup process for your card as described in this section and
successfully accessed the Internet through your PC using the PC Card
modem.
Installing Cingular Software
You must install the Cingular software that came bundled with your 3G PC card modem
before activating the card.
1. Insert the Cingular CD that is provided with your PC card modem into the PC you
intend to use for PC card setup.
2. Follow the instructions on screen to complete the Cingular software installation.
3. Restart your computer if prompted.
4. If the Cingular Communications Manager program is running, skip to the next step.
Otherwise, navigate to Start > Programs > Cingular > Cingular Communications
Manager to start the Communications Manager program.
5. De-select all checkboxes on the first configuration page, including the Use this as
my default Wi-Fi management utility option (checked by default).
6. A warning screen will display. Check the Do not show this message again
checkbox and click the OK button to continue.
7. Click the Finish button to complete post-install configuration.
Preparing the PC Card
Now that you have installed the required activation software on our PC, you can prepare
the card for first use.
1. Remove the PC card from the packaging and attach antenna if necessary.
2. Locate your SIM chip and remove it from its packaging if necessary (the SIM chip
may be attached to a larger 3x5 plastic card from which it must be removed).
3. Insert the SIM chip into your PC card modem. When inserted correctly, the SIM chip
will “click” in place and sit perfectly flush with the edge of the PC Card.