User Guide
Table Of Contents
- SonicWALL TZ 190 Wireless Getting Started Guide
- Before You Begin
- Checking Package Contents
- Any Items Missing?
- Recording Configuration Information
- Recording Internet Service Provider (ISP) Information
- Overview of the SonicWALL TZ 190 Wireless Appliance
- WWAN PC Card Setup
- Sprint Wireless PC Card Setup
- Cingular Wireless PC Card Setup
- Verizon Wireless PC Card Setup
- Before You Register
- Creating a mysonicwall.com Account
- Registering Your SonicWALL TZ 190 Wireless Appliance
- Insert the WWAN PC Card Modem
- Apply Power to the SonicWALL TZ 190 Wireless
- Connect Directly to the SonicWALL TZ 190 Wireless Appliance
- Log into the SonicWALL TZ 190 Wireless Appliance
- If the SonicWALL Configuration Wizard Does Not Appear
- SonicWALL TZ 190 Wireless Setup Wizard
- Configuring WWAN as Failover
- Configuring LAN Settings
- Log Into the Management Interface
- WWAN Connection Status
- Manage WWAN Connection
- Check Internet Connectivity
- Windows XP
- Windows 2000
- Windows NT
- Safety Instructions and Regulatory Information
DRAFT not for production
Page 12
7. You will be presented with a screen indicating the completion of the Activation
process. Click Finish to proceed
Verifying Your Connection
It may take up to 4 hours for your WWAN PC card to become active on the Sprint
network. After the card has been set up and is active, you can view your connection type
and verify that the WWAN PC Card is transferring data.
Alert: In order for the connection testing to be valid, it is important that you first disable
all other network connections, such as a Wi-Fi or LAN connection, before
continuing. Leave only your PC card connection enabled.
1. Open the Sprint PCS Connection Manager program.
2. Click the GO button to connect to the Sprint network.
The WWAN PC card will take a few minutes to connect to the Sprint network. When the
connection is ready, the status will read “Connected”.
Note: If you have recently activated your card with Sprint, keep in mind that the initial
activation of your card may take up to 4 hours.
3. In the Windows interface, select Start > Run.
4. Enter “cmd” in the Open field and click the OK button.
5. At the prompt, type the command “ipconfig” and press Enter on the keyboard. Your
network device status will display.