User's Manual

Page 3
Wall Mounting the SonicWALL SonicPoint
Follow the instructions below to mount the SonicPoint on the wall.
1. Using the mounting plate as a template, mark the places to insert the mounting anchors.
2. Using a #2 Phillips screw driver, press the tip of the anchor into the marked places on the
hollow wall.
3. Turn the screwdriver clockwise until the anchor is flush with the wall. Repeat for the second
anchor.
4. Insert a #6 x 1
1/4” pan head Phillips self-tapping screw into each anchor leaving a gap for
the mounting plate.
5. Hang the mounting plate on the screws. Use the middle row of mounting holes.