User guide

TIMER SETUP
Push buttons 1 – 4 are visible.
Push buttons 5 – 6 are not visible and are located under the front panel. These buttons can
be pressed through the panel.
To set the timer:
1. Press 5 – 6 simultaneously to enter programming mode.
2. Press 4 to select the desired timing sequence.
3. Press 6 for “up/down mode”. Press 4 to select “d” (down).
4. Press 6 for “out mode”. Press 4 to select “b”.
5. Press 5 once to exit programming mode.
13
Go To Top Of Document