Model PSKIT-H540 Ultrasonic Kit 40 kHz 500 Watts INSTRUCTION MANUAL Sonics & Materials, Inc. 53 Church Hill Road ♦ Newtown, CT 06470 USA 203.270.4600 ♦ 800.745.1105 ♦ 203.270.4610 fax www.sonics.com ♦ info@sonics.
SONICS Model PSKIT-H540 This Sonics & Materials manufactured ultrasonic kit is designed for use as an internal electrical component. It should only be powered after being properly mounted and earth grounded inside of an industry standard NEMA type electrical enclosure. IMPORTANT INFORMATION 1. NEMA enclosure needs to be properly fan cooled and vented. 2. Incoming line voltage (120 VAC 50/60 Hz.) must be noise filtered and correctly earth grounded. 3.
MAIN BOARD SIDE Main A/C Power Connection with Sonics #131-0184 Plug Connector. Fuse Holder Optional RF Cable Panel Mount Fischer Connector. Sonics #131-0172 RF Converter Output with Optional Fischer Connector. MAIN BOARD: Similar to a computers motherboard, the kits main board is the primary ultrasonic power source. J1 - Primary in-coming line voltage connection. P6 – High voltage RF converter cable connection. P7 – High voltage RF converter cable connection ground.
FRONT & PLL BOARD SIDE DB9 - PLC I/O Connection Push to Manually Fire Ultrasonics Push to Rest an Overload Condition PLL BOARD (Phase-Lock-Loop): Working in tandem with the main board, the primary purpose of the PLL board (also referred to as a control board) comprises of automatic frequency tuning, energy functions and variable amplitude settings.
WARRANTY Sonics & Materials, Inc., hereinafter referred to as "SONICS”, warrants its products for a period of one year from the date of shipment against defects in materials and workmanship under normal installation, use and maintenance as described in the operating instructions which accompany such equipment.
