Instruction Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
46 INSTRUCTION MANUAL • MODEL FM POWER SUPPLY
SWITCH POS. OFF POS. ON DEFAULT
DIP-1 Force Trigger Mode (FT) T1 (ZT) Model OFF
DIP-2 Weld by Timer 2 (T2) Weld by Energy (EN) OFF
DIP-3 Normal mode without Rotary table Rotary table mode to DIP-4 OFF
DIP-4 Rotary table mode with pulse control Rotary table mode with continuous OFF
control and ackn.
DIP-5 Timer 4 adds to hold time Timer 4 as shake off pulse OFF
during press return
DIP-6 N/A N/A OFF
DIP-7 Printer output 1,200 Baud Printer output 4,800 Baud ON
DIP-8 Alternate start method Two-hand start only ON
APPENDIX
DIP SWITCH DEFAULT SETTINGS
Refer to p. 18 for function abbreviations.