Manual

1.2 External Connections

Figure 1: Front view of the Irrigator

# Label Function details

1. Main Power Socket for irrigator's power supply cable.

2. Detergent inlet Allow detergent to flow into the tank.

3. Water inlet Allow fresh water to flow into the tank.

4. Waste outlet Allow waste water to flow out of the tank.

5. To printer* Socket to irrigator's printer.

6. Temperature* Socket for ambient temperature sensor.

7. LAN socket* Allow connection to a Personal Computer or LAN to display the

performance history of the Irrigator.

8. Diagnostic port** Provides diagnostic information for trained service personnel. The Remote

Diagnosis Interface (RDI) (sold separately) can make this information

available to a remote operator via the internet..

* Present on MRS system only

** For authorised diagnostic use only

IMPORTANT NOTE:

Please check the installation requirements (section 2) and installation guide (section 3) prior to installation to

ensure the machine can perform at optimally in accordance with relevant standards. Unvalidated installation

can violent the warranty conditions.

S-2800 Irrigator Operating Manual Page 2