Instruction Manual
Heater Temperature: 50
O
C.
Duty cycle disabled.
Lid disabled
Beep enabled
U.SEt
U.On
User setup. Use More or Less key to toggle U.On
Lid
L.On
L.OFF
Lid.o
PAUS
Lid interlock option
Use More to enable lid interlock
Use Less to disable lid interlock
When lid interlock is enabled and the lid is open.
When the lid interlock is enabled and the lid is opened the
ultrasonics will pause When lid is replaced press Start to continue.
P.dc
Power set to enable or disable Duty cycle. Default value is 50% of 5
sec period. See status key for the Duty cycle set.
d.On Enable Duty Cycle with More key – factory default 50% power.
d.OFF Disable Duty cycle with Less key and ultrasonic is set to continuous
100% duty set operation.
Clear
.
0.0
Press Clear to
Switch off heater
Remove error message without starting up ultrasonics.
Restore user setting.
Reset factory setting.
Press Status key and scroll through to check status on user or
factory setting.
.0.0 During Setup or Status key presses use Clear to exit routines
More Less
Heater
On Off
Set Heater On from 0
O
C to 60
O
C. First key press displays set
temperature. Set temperature with More and Less key.
Start
Stop
Set Cleaning from 1 to 99 minutes. Press Start to clean with
countdown timer. More or Less key changes timer to a new value.
The next Start will continue with the new set time. (Version S.d 08
1-60)
Degas Set Degas 1-99 minutes. More or Less key changes degas time. The
next Degas will continue with the new set time. (Version S.d 08 1-
60)
Power Level
Setup More or Less key toggles Enable or OFF states as displayed. Preset
Degas and Cleaning time using More or Less key.
Status More or Less key is used in most functions. Also see Status key
description.
Clear
Not applicable.
Degas
Not applicable.
Single press of More and Less key will increase or decrease number by 1 in most
operations. In the clean time holding longer duration changes XX.ct values by 10.
Issue date: 190913-1