User manual

Sanitiser (specic types only)
Do not clean the sanitiser when the UV light bulb
is hot.
For optimal effectiveness, it is recommended to
clean the sanitiser weekly.
1 Unplug the sanitiser.
2 Slightly lift the drip tray and pull it out.
Rinse the drip tray and wipe it clean with
a damp cloth.
3 Cleanallreectorsurfaceswithadampcloth.
4 Remove the protective screen in front of the
UV light bulb.
To remove the screen, gently lift it up (1) and pull it
out (2).
5 Remove the UV light bulb.
To remove the light bulb, grasp it and pull it out of
the metal clasp.
6 Clean the protective screen and the UV light
bulb with a damp cloth.
7 Reinsert the UV light bulb.
To reinsert the light bulb, align the bottom of the
light bulb with the metal clasp and push the bulb
into the clasp.
8 Reinsert the protective screen.
To reinsert the screen, align the pegs on the screen
with the slots on the reective surface near the UV
light bulb. Then insert the pegs into the slots and
slide down the screen to secure it in the sanitiser.
ENGLISH 19