Owner's Manual

5
ASSEMBLY
Required Tools
To complete assembly of your Sonic Glide, you will need the supplied double
headed allen key and a multi spanner.
Prior to assembly, check that all parts are present. If any parts are missing or
damaged, please contact one of our customer service representatives by
telephone on 01332 274242, or by e-mail at [e-mail]
A. Front Wheel Installation
• Present the front wheel ensuring the axle is
fully located at the top of the fork slots.
• Ensure that the retaining washers are correctly
seated in the retention slot on each front fork leg.
• Spin the wheel to make sure that it is centred
in the frame and does not wobble from side
to side.
• Tighten both domed axle nuts securely with your spanner.
WARNING: Do not remove or disable the retaining washers. These are secondary
retention devices. As this name implies, they serve as a back-up for a critical
adjustment. If the wheel is not secured correctly, the secondary retention device
can reduce the risk of the wheel disengaging from the fork. Removing or disabling
the secondary retention device may also void the warranty.