Safety Instructions

Inspection
adjustment every month. On removing the seat post from the frame, you will notice a mark
about 65mm up from the bottom with the words or “minimum insertion”. To avoid damage
to either the seat post, the frame or possibly the rider, the minimum insertion
mark must be inside the frame.
Lubrication
gr ease, rust or dirt. T hen apply a thin
to the fra me. Re-insert, adjust and tighten
the seat post in the frame.
Seat Clamp Nut
Standard
Seat
Post
Seat Post
Binder
Bolt
17
Saddle and seat post
Adjustment
The seat can be adjusted in height, angle and distance from the handlebars to suit the
individual rider. Saddle angle is a matter of personal preference but the most comfortable
position will usually be found when the top of the seat is almost parallel to the ground, or
slightly raised at the front.
The saddle can also be adjusted by sliding it forward or back along the mounting rails to
the clamp under the seat and place it in the frame without tightening. Adjust it to the desired
position on the post, adjust the height to the required level and tighten the binder bolt. Test the
security by grasping the seat and trying to turn it sideways. If it moves, you will need to further
tighten the binder bolt.
Remember that the minimum insertion mark must remain inside the frame assembly.