User Guide

Importing Scenarios 83

Importing from Tape

To import a scenario from a DLT or Exabyte tape:

1 Choose File > Import (or from within the Project Manager, click New from Script). The

Create New Scenario from Script dialog opens.

2 Select the Import From Tape option.

3 If importing a Scenarist SGI archive, select the From Scenarist SGI option.

4 If importing an archive from a Unix tape device, specify the Block Size for the device. If

using a Windows tape device, leave the Block Size set to its default of 64.

5 Make sure the source tape drive is selected in the Tape Drive menu.

6 Click the Restore Folder Browse button. In the Browse for Folder dialog, select a location

for the imported assets and click OK.

7 Click the Scenario File Browse button. In the Select File dialog, enter a ﬁlename and

location for the scenario, then click Open.

8 Click OK.

9 When prompted with the required and available disk space for the scenario, click OK to

proceed.