User Guide

282 Appendix C, Karaoke Titles
In the Mode Settings section, set the Application Mode to Karaoke.
In the Settings section, configure each of the channels in the Karaoke stream.
7 Click OK to close the Audio Application Mode dialog.
Karaoke Commands (SPRM11)
SPRM11 can be used to enable and disable audio channels 2, 3, and 4 in the stereo output
of the Karaoke title. You can therefore author menus with buttons that allow the viewer to
choose whether those channels are heard. For information on system parameters, see
Chapter 14, “Navigation Parameters.
To write to SPRM11 for a Karaoke title:
1 In the Scenario Editor authoring area, locate the title to which you will add the Karaoke
command select its PGC.
2 If the Simulation window is not visible, select View > Simulation Window.
3 In the Simulation window, make sure the PGC Commands tab is selected.
4 Set the Pre/Post/Cell menu (just below the PGC Commands tab) to the type of command
you want to add.