User Guide

228 Chapter 15, Bitwise Compares
Assigning a Bitwise Compare to Title_3
To assign a Bitwise Compare to Title_3:
1 In the Scenario Editor authoring area, double-click the title menu Btns flag, either on the
PGC icon if the menu PGC is collapsed, or the Buttons icon if the menu PGC is
expanded. The Simulation window opens. Make sure the Button Commands tab is
selected at the bottom of the window.
2 In the Command List, confirm that “JumpTT Title_3” is selected, then select the Compare
option and do the following:
• Select the GPRM option.
• Make sure the first GPRM menu (on the left) is set to GPRM0.
• Make sure the second GPRM menu (on the right) is set to GPRM1.
• Set the Compare menu (in the middle) to Bitwise Compare (the & symbol).